Mislead: America’s Secret Epidemic is always testing items & posting the results, she recently tested a Hamilton Beach crockpot & it came back with a reading of 20-30ppm lead, which is very low. BUT, their website FAQ claimed they contained “no measurable amounts of lead”. So I wrote to them, and here is their response. This also goes to show the at home swab test kits aren’t all that accurate, as I tested mine on a chipped spot & it didn’t register any lead. Even though they come with instructions for testing all kinds of surfaces, Tamara says they really can only be relied on for testing paint. Here is Tamara’s post: https://www.facebook.com/photo.php?fbid=614952988623109&set=a.452063581578718.1073741828.195674253884320&type=1&theater
Response from Hamilton Beach: ” Thank you very much for bringing this poorly-worded FAQ answer to our attention and allowing us the opportunity to address your concerns. We will work to update our FAQ with a clearer answer that summarizes what I am going to write here.
I accept that the XRF was used by a skilled technician. However, it’s the wrong tool for the job at hand. The job here is to determine the food safety of earthen vessels used to heat food.
Lead and cadmium are naturally occurring elements in the earth. As crocks are earthenware vessels, trace amounts of lead and cadmium may be naturally present in them. Our crocks are glazed to create a barrier between food and earthenware. Thus, the issue is how to evaluate the effectiveness of the barrier that separates lead and cadmium in earthenware vessels from the food on the right side of the barrier coating.
The XRF is the wrong tool for measurement. The XRF bombards the earthenware vessel with X-rays that penetrate the glazed coating: the XRF provides a look “behind” the coating at the elemental content of the earthenware vessel. Thus, the XRF tells us that the earthenware vessel – behind the barrier – has 23 ppm of lead. We already know lead is a naturally occurring element in the earth, so we’re not surprised the XRF reveals its presence behind the barrier.
To answer the question, “Does the barrier effectively prevent any of the naturally occurring lead from contacting food?” the correct tool is ASTM C378 extraction test procedures as measured by flame atomic absorption spectroscopy. (ASTM International, formerly known as the American Society for Testing and Materials, is a global standards-setting body.) This test measures how much, if any, lead can penetrate the barrier and actually reach the food inside the vessel. This test measures what happens on the “right side” of the barrier. This test method has detection limits of 0.1μg/ml for lead and 0.01μg/ml for cadmium.
All of our crocks are evaluated using ASTM C378 extraction test procedures as measured by flame atomic absorption spectroscopy. In our crocks, the amount of lead or cadmium present in the extractant is below the test’s limits of detection.
Additionally, the factories that manufacture our crocks are certified ceramic production facilities whose ceramic ware is deemed to satisfy FDA heavy metal requirement. For more information on these requirements, please see http://www.fda.gov/InternationalPrograms/Agreements/MemorandaofUnderstanding/ucm107558.htm.
I hope this addresses your concerns.”
Eco-Friendly Mama: Safe product recommendations with a focus on organic and Made in USA! 